BAFO USB to
Steps :
1
Remove Dongle
Software Key from your computer
2
Put the BAFO CD
in the CD ROM
3
Connect BAFO USB
to your computers USB port
4
Windows should
find new hardware and install the driver from the BAFO CD
5
Now connect a
Null Modem adapter or cable between the BAFO cable and the Toyota Embroidery
Machine.
6
Install Dongle
Driver from the Stitch 2000 pro CD in to your computer.
7
Go to Device
Manager in your Windows program and open the USB BAFO connection, click on the
Port Settings and set the Bits per Second to 9600, Data Bits
to 8 , Parity to None, Stop bits to 1, and Flow Control
to None.
8
Your Stitch 2000
program should be set to the same comm port as the
BAFO connection. Com 1, Com 2, Etc. You
will find this setting in the Stitch program under Options / Options /
Embroidery Machine Connection.
9
You are now ready
to attach the Dongle Key to the computer and Windows should load the
appropriate driver for it.